A Practical Guide to Window Recess Depths
Share
A blind can have the right width and still be the wrong fit. That usually comes down to the space from the front of your recess to the glass, plus anything sitting in the way. This guide to window recess depths explains what to measure before ordering, when a recess fit will work, and when an outside fit is the simpler answer.
What is a window recess depth?
The recess is the boxed-in area around your window. Its depth is the measurement from the front edge of that opening back towards the window glass or frame. It tells you how much room there is for the blind, its brackets and its controls.
Do not confuse recess depth with recess width or drop. Width is measured from one side of the opening to the other, while drop is measured from the top to the sill. Depth is measured front to back. All three matter for a made-to-measure blind, but depth is the measurement that prevents blinds from catching on handles, vents or tiles.
For most inside-recess blinds, measure at the point where the blind will sit. Hold a tape measure straight and level from the front of the recess to the nearest obstruction. If the depth varies, use the shallowest measurement. A blind has to clear the tightest point, not the deepest part of the opening.
Why recess depth matters when buying blinds
A recess fit gives a neat, built-in appearance. It can also leave your window sill clear and keep the blind closer to the glass. However, it only works when there is enough clear room for the product you have chosen.
Roller blinds need space for the roller tube and brackets. Vertical blinds need room for the headrail, louvres and operating mechanism. Blackout fabrics can improve light control, but the blind still needs to sit far enough forward to avoid handles and frames. No blind fitted inside a recess will block every sliver of light at the sides, but a correct position reduces unnecessary gaps.
The key question is not simply, “How deep is my recess?” It is, “How much unobstructed depth do I have where the blind will be fitted?” A 100 mm recess may sound generous, for example, but a 35 mm projecting handle changes the available space considerably.
Measure the clear depth, not just the wall depth
Start at the front face of the recess. Measure back to the part that projects furthest into the space. This might be a window handle, trickle vent, frame, tile edge, cable trunking or a secondary glazing panel.
If your window has opening handles, check their highest point and their furthest projection. A blind positioned too close may rub against them every time the window is opened. In some cases, turning or folding the handle can help, but do not rely on that unless you are happy to do it daily.
For tiled bathroom or kitchen windows, measure from the front of the tile rather than the plaster wall behind it. Tiles often reduce the usable recess more than expected. This is especially relevant for waterproof PVC blinds, which are a practical choice in humid rooms but still need a clear fixing position.
Typical depth needs for roller and vertical blinds
There is no single minimum depth for every blind. Tube size, blind width, fabric thickness, bracket design and control type all affect the room required. Always check the product measurements supplied for the exact blind you are ordering.
As a useful starting point, many roller blinds require around 60 mm or more of clear recess depth for a comfortable inside fit. Wider roller blinds may use a larger tube, so they can project further into the recess. If you are close to the minimum, allow extra clearance rather than trying to make a tight fit work.
Vertical blinds commonly need more room because the headrail sits forward of the louvres and the louvres need space to turn. A recess around 75 mm to 100 mm deep will usually give more flexibility, though the best requirement depends on the headrail and louvre size. If you are replacing existing vertical slats but keeping your headrail, measure the existing set-up rather than assuming a new system will occupy the same space.
A shallow recess does not mean you cannot have blinds. It simply means an outside-recess fit may give a better result.
When an outside-recess fit is the better choice
An outside-recess fit places the blind on the wall, lintel or ceiling in front of the window opening. It is often the most practical option for shallow recesses, inward-opening windows, prominent handles and windows with little clear fixing area.
Fitting outside the recess allows the blind to sit ahead of obstructions. You can also make it wider and longer than the opening, which improves privacy and light coverage. This is particularly useful in bedrooms where blackout performance matters, or in rental properties where awkward window frames make an inside fit difficult.
There are trade-offs. The blind will project into the room slightly more, and you need a sound surface for fixing brackets. Check for fragile plaster, metal lintels, concealed wiring and pipework before drilling. If fixing into a ceiling or lintel, make sure the chosen position leaves enough room for the blind to roll up without hitting the ceiling or coving.
For an outside fit, measure the area you want covered, not the internal recess size. Decide how much overlap you want on each side and above the window. More overlap generally means better coverage, but make sure it does not interfere with nearby cupboards, shelves or wall lights.
A simple way to assess your window recess
Before ordering, take five minutes to inspect the whole opening. Measure the depth at the top first, as this is where the brackets and headrail will sit. Then check the left, centre and right sides in case the wall or window frame is uneven.
Look for anything that could affect the blind’s path. The common problems are handles, vents, chunky uPVC frames, alarm sensors, tiled reveals and curtain poles mounted too close to the opening. Also consider whether the window needs to open regularly. A blind that fits physically but makes everyday ventilation awkward is not a good fit.
If you are ordering a roller blind, think about which way it will roll. A standard roll generally places the fabric close to the window, while a reverse roll brings it forward. Reverse roll can help clear a handle, but it makes the blind sit further into the room and may alter the look of the top roll. Choose it for clearance where needed, not just appearance.
Do not subtract clearance from your recess width
For a made-to-measure recess blind, suppliers normally make the required deductions from the width to allow for brackets and smooth operation. Your job is to provide the full recess width at its narrowest point, following the product’s measuring instructions.
Depth is different. It is not usually a number that is deducted from your order size. It is a suitability check. If the recess is too shallow for the blind and its controls, choosing an outside fit is safer than reducing the width and hoping it clears the handle.
Common measuring mistakes to avoid
The first mistake is measuring only at the bottom of the window. Blinds are fixed at the top, so the available depth there is what matters most. The second is ignoring a handle because it looks small. Even a small projection can stop a blind hanging straight.
Another common issue is measuring to the glass while overlooking a frame that projects further forward. Measure to the nearest obstacle, not the furthest surface. Finally, do not assume that a blind in one room will fit the same way in another. Bay windows, older properties and replacement windows can all have slightly different recesses.
If you are unsure, order a sample to check the fabric in your room, then measure again with the chosen blind type in mind. Queen Blinds makes made-to-measure ordering straightforward, but accurate dimensions and a sensible fitting choice are still what make the finished result look right.
A little extra checking now can save a blind from rubbing, sitting proud of the recess or blocking a window handle. Measure the clear space at the top, choose the fit that gives the blind room to work, and you will have a window covering that looks tidy every day.